Hi
To add to the debate / tips I have the following on mask cleaning with the double seals as used on the Resmed products (Quattro / Liberty etc)
1. As a cleaning solution use a small amount of mouth wash in warm water. Safe to use as it goes in your mouth and after swishing around you breath some of the residual left as a taste in your mouth - works for me
2. I get some scale build up between the two rubber seals and in the lower part of the mask - using the above mix I found that an electric toothbrush works very well in getting the scale off (very hard water area). I used the type that vibrates only not the rotating type - that may damage the seals
Hope this may be of assistance - what else have you found that works?
If you have a novel solution post it up so we can all experiment!
Cheers to you all
TWW
UK
To add to the debate / tips I have the following on mask cleaning with the double seals as used on the Resmed products (Quattro / Liberty etc)

1. As a cleaning solution use a small amount of mouth wash in warm water. Safe to use as it goes in your mouth and after swishing around you breath some of the residual left as a taste in your mouth - works for me

2. I get some scale build up between the two rubber seals and in the lower part of the mask - using the above mix I found that an electric toothbrush works very well in getting the scale off (very hard water area). I used the type that vibrates only not the rotating type - that may damage the seals
Hope this may be of assistance - what else have you found that works?
If you have a novel solution post it up so we can all experiment!

Cheers to you all

TWW
UK

Comment