Tweet
For resmed air sens 10: This device is equipped with a SIM card to transfer your DATA every day without your permission or your acceptance!
They can also change the settings without warning you.
If you want to keep the CPAP DATA anyway you have them on the SD card that you can share it with who you want Family or doctor. For this you can remove the Sim transmission DATA:
1° Unclip the front cover gently. (picture 2)
2° remove the 2 rear screws at the rear back 8 (one on the left and one on the right-picture 3) They are Torx scews!
3° remove the 2 screws(tore) on the front panel( one on each side of the digital screen.
4° For this step --TAKE YOUR time!!!
or wait for next pictures if interested: The top cover is clipped on the rear and the bottom front by 2 ranges of clips. Use a fine flat screwdriver to unclip the front then the back and gently remove this cover.
5 When done on picture 1 there is a small jack under the SD card rack. This jack is supplied by 4 white cables. Just unplug this jack by lifting gently these four wires with a small flat screwdriver.
Re-assemble all screws and covers. You are now sure that no one can see your own data or use them.They are store on your SD card
I can send more pictures if anyone needs more information
Yahoo!!!
ID
They can also change the settings without warning you.
If you want to keep the CPAP DATA anyway you have them on the SD card that you can share it with who you want Family or doctor. For this you can remove the Sim transmission DATA:
1° Unclip the front cover gently. (picture 2)
2° remove the 2 rear screws at the rear back 8 (one on the left and one on the right-picture 3) They are Torx scews!
3° remove the 2 screws(tore) on the front panel( one on each side of the digital screen.
4° For this step --TAKE YOUR time!!!
or wait for next pictures if interested: The top cover is clipped on the rear and the bottom front by 2 ranges of clips. Use a fine flat screwdriver to unclip the front then the back and gently remove this cover.
5 When done on picture 1 there is a small jack under the SD card rack. This jack is supplied by 4 white cables. Just unplug this jack by lifting gently these four wires with a small flat screwdriver.
Re-assemble all screws and covers. You are now sure that no one can see your own data or use them.They are store on your SD card
I can send more pictures if anyone needs more information
Yahoo!!!
ID